Hotel room price protection from familiar watchdog group

Travelers booking hotel rooms often use a variety of sources while trying to get the best price. Once satisfied that they have found the best price, they book it and forget it. What they don’t realize is that between booking and staying, the price may very well go down. A price drop might happen for a number of reasons and might be a limited-time offer too. Now, a new service tracks hotel pricing and automatically refunds the difference between what a traveler paid and the lower, sale price.

Tingo is the first hotel booking site that automatically rebooks hotel rooms at a lower price if the rate drops, and then automatically refunds the difference to travelers’ credit cards.

“Travelers could have saved millions last year had there been a simple system in place that automatically rebooked their rooms,” said Smarter Travel Media General Manager David Krauter in a release. “And that’s what Tingo does, by taking the gamble out of booking and refunding travelers’ money when rates drop.”

The deal is simple: Book a “Money Back” room and Tingo watches that room’s rate to see if it changes. If the price drops, Tingo rebooks that same room at the lower rate and refunds the difference to the booking credit card.

The process adds up to big numbers too. Using comScore Media Metrix for TripAdvisor, Inc. and its subsidiaries, Worldwide, January 2012, Tingo estimates that in 2011 alone, Americans could have saved nearly $314 million if they had had access to a site like this.

“It’s a no-brainer,” adds Krauter. “And just to put it in perspective, $314 million would book the $2,000 per night Penthouse at The London NYC, straight through for the next 350 years.”

If this all sounds a bit familiar, it is. Tingo is a sister site of Gadling favorite AirfareWatchdog, a site best known for tracking airline fares and notifying members when point-to-point fares become available that match what the member is willing to pay.



Flickr photo by Bob B. Brown

Tsunami powered ghost ship closes in on Canadian shores

When last year’s earthquake and resulting tsunami rocked Japan, the destruction of property and disruption to travel plans were immediate. Minor quakes after the initial tremor did little more damage. But a Japanese squid-fishing boat has been drifting across the Pacific Ocean all year and is now closing in on British Columbia’s north coast.

“It’s been drifting across the Pacific for a year, so it’s pretty beat up,” said marine search coordinator Jeff Olsson of Victoria’s Joint Rescue Coordination Centre in a Times Colonist article.

The 150-foot tsunami ghost ship was sent out to sea by the weather event and first found drifting right-side-up about 140 nautical miles (260 km) from Cape Saint James on the southern tip of Haida Gwaii, an archipelago on the North Coast of British Columbia. A Canadian Coast Guard plane on a routine surveillance patrol spotted the ship on March 20, causing them to issue a warning to all vessels that the ship is an obstruction to navigation.

“The ghost ship is probably going to be pretty much worthless – nobody’s going to want to have anything to do with it because of the huge costs that are going to be incurred [towing it to shore],” said Gray, senior captain with the Vessel Assist towing company reports the Times Colonist, adding “All that garbage, it’s going to hit Alaska, it’s going to hit B.C. and it’s going to hit Washington.”

Check out Antarctica in Pictures!
%Gallery-147996%

Flickr photo by elmas156

Evacuated Tube Transport could take you to China in two hours

Ever look at a pneumatic tube at a bank and think, “Why couldn’t I travel like that?” A new form of high-tech transportation called Evacuated Tube Transport (ETT) could take passengers in car-sized capsules traveling through tubes so fast that you could make it from New York to Beijing in two hours. Unlike pneumatic tubes that work with air and suction, the ETT works via magnetic levitation and frictionless tubes. The ETT could travel up to 4,000 miles per hour for long trips (over twice the speed of the supersonic Concorde jet), or 370 miles per hour for shorter trips, and tubes would be routed like freeways to avoid congestion. ETT proponents claim it’s silent, cheaper than planes and faster than jets, though an extensive network of tube rails would have to be constructed to connect the network.

While the capsules may look a bit claustrophobic, the ET3 consortium claims that the transport would provide more room per passenger than airplanes or cars, and TVs could be provided to “provide distraction from negative thoughts.” Tubes would be constructed with emergency escape hatches and EMT facilities in case of emergency, and the braking system would be automatic with multiple backups (unlike the Springfield monorail).

Licenses for the ET3 concept are said to have been sold in five countries, and you can sign up for the “first 3D Virtual Ride” (coming in Q2 of 2011, oops!) on the ET3 website, but a prototype has yet to be developed. ET3 hopes that with more support, low-cost world travel could be possible in a decade. The question remains, would we still have to turn off our electronic devices for the trip?

Video: Annapurna Base Camp, Nepal


In 1994, I hiked to the Annapurna Base Camp in Nepal. It was one of the high points of a yearlong trip across the Middle East and Asia and my memories of that trek are still vivid today.

The Annapurna Circuit and Annapurna Base Camp treks were popular even back then and although I walked alone, I met several other hikers along the way. There were few guesthouses though, and mostly I stayed in spare rooms in local villages. Now I’ve heard that there are Internet cafes along the way. I haven’t confirmed this; I don’t want to know. I love adventure travel because it takes me away from my day-to-day life. The last thing I want to do while trekking in the Himalayas is to check Facebook.

Two memories stick out the strongest. The first happened three or four days into the hike. I was at a high altitude, puffing along with a forty-pound pack and all bundled up to stave of the bitter cold. I made steady but rather slow progress thanks to the high altitude. Then a Sherpa passes me wearing only thin trousers, a shirt and flip-flops. He was carrying a roof beam over his back, secured into place with a harness and forehead strap. The Nepalese are a tough people!

I got to the base camp and stayed in a stone hut that night. The next morning I went exploring. Pretty soon I came across some mysterious tracks in the snow. They looked for all the world like the footprints of a barefoot man, except very large and strangely rounded. I followed them for a few hundred feet until I reached a part of the slope shielded from the sun by an outcropping of rock. This part of the slope hadn’t received any sunlight, and so the snow hadn’t melted at all. The tracks suddenly became much smaller and were obviously animal in origin. To me they looked like a fox’s, although I can’t say for sure.

The explanation is simple: the sun warmed the snow on the exposed part of the trail and the tracks partially melted, becoming wider and rounder. The claws became “toes” and the pads of the feet joined into one oval mass. So. . .no yeti sighting for me!

Still, that did not dampen my excitement and awe of being at the breathtaking location surrounded by snow-capped Himalayan peaks. Put this video on full screen, sit back, and enjoy.

The best coffee for on the go travelers

We all become time and sleep managers over the course of our travels. Whether shaking the grip of jetlag after a seven-time-zone-jump or getting over the sleep lost from a weekend trip to Hong Kong, managing our time in bed is critical to building future productivity, so we plan well – and we occasionally cheat.

Our favorite way to stay ahead of jetlag at Gadling is with caffeine, ideally enjoyed at the corner cafes in small Parisian neighborhoods but most often brewed in our very own homes and offices as we recover from our trips abroad.

For the traveler, coffee-on-the go is a necessity. We learn to live out of the single serving pods that come in our ensuite hotel rooms and order proper cappuccinos in Italy and café au laits in France. We learn the difference between Guatemalan and Ethiopian beans, between a medium and a dark roast. And we hate (although sometimes we love) the sight of a Starbucks in our favorite picturesque tourist destination.

We also tend to bring that coffee affection home, though usually more in a single serving environment. (After all, since we’re always on the move it makes little sense to brew a twelve-cup batch). And that brewing technology ranges from the most simple, analog device to the most high-tech brewing symphony. Let’s start at the bottom.The analog siphon (our favorite, the Yama tabletop)

There’s a hand made, wooden-framed version of the analog siphon sitting on our editor in chief’s desk, used infrequently to brew a batch of simple coffee for the visiting colleague. Brew is made by filling the bottom portion of two lobes with hot water and then heating the section with a candle, or Sterno. Once the water reaches a critical temperature, it flows up to the top of the lobe where the coffee is contained. As the grounds saturate and the brew thickens, the consumer can design how strong the drink will be. Then, once the heat is removed, the brew falls to the bottom lobe and the top section can be removed and washed. The resulting beverage is mild in intensity and full in flavor.

The stovetop siphon (our favorite, the Bialetti Moka Pot)

High heat from the stovetop requires that most efficient siphons are made out of metal, and the classic iteration of this design is the Italian made Bialetti. In principle, this works the same way that the analog siphon works. In this case, the main difference is that there is more gas under the hood to speed the process, so the water pushing through the coffee is also mixed with steam.

Compared to the analog siphon, most Bialettis use a higher percentage of coffee versus water in the process, thus producing something closer to (but not exactly) an espresso as a product. It’s not the right strength for every single coffee drinker, but for a few, the ratio is divine.

The French Press (our favorite, the REI Tabletop French Press)

There’s a certain, simple feel about a French pressed coffee that makes drinking it enjoyable. Perhaps it’s the quiet time spent watching the coffee grounds steep or the pleasure in pushing the steel mesh to the floor of the glass. Either way, the result is a clean cup of coffee that’s highly customizable to your taste.

The variables, of course, are the volume of grounds and the amount of time the grounds steep, both of which you determine. It’ll usually take a bit of time to find the right combination that suits your palette, but for the experimental epicurean, the press is a delightful retreat. Freakonomics has a great resource for brewing the best French Press if you’re looking to get started.

The Pod Launcher (our favorite, the Delonghi Lattissima Premium)

On the digital end of the spectrum, a variety of pod-based technologies are making well done, single serving cups of coffee a common reality, and if you’re looking for aesthetic, Nespresso has the competition beat. All that one needs to do to produce a ready-to-consume cup of espresso or Americano is load up the pod, lock it in place and press the brew button. Seconds later, a delicious cup of steaming coffee is ready to go.

Most of these devices benefit from the fact that coffee pods can be vacuum-sealed and shipped around the world, guaranteeing freshness and quality control. Those who want a completely fresh-ground experience, however, may have to look elsewhere.

The Full Digital (our favorite, the Philips Saeco Xelsis Digital ID — pictured)

For those looking for the fresh ground experience there’s no better place to look than the superautomatica. In contrast to the pod launcher, the superautomatica pulls beans in from an onboard hopper, grinds them, tamps them and then runs water (also onboard) through the system to produce an excellent stream of coffee. Everything is programmable here, from the number of beans used in the process to the length of the pull to the granularity of the grind. Depending on the model, milk can even be incorporated (steamed or not) through an inline system, and if you want to steam your own then there’s also a wand. Short of having your own espresso bar with a barista attached, the superautomatica might be the best single-serving cup of coffee that one can produce. Just be willing to pay for it. Models range in price from around $500 to well over $3000, with the above Xelsis Digital ID running just under $3000. Yes that’s a fingerprint reader on top of the unit – it’s used for identifying users and their favorite coffee configurations. For the cost, expect excellence, and with the superautomatica you’ll get it.

With contributions and mentorship from Charlie Habegger at Intelligentsia Coffee in Chicago.