Daily Pampering: Emirates and Montblanc create limited edition writing instrument

Need a new pen? Emirates has partnered with Montblanc to offer customers the opportunity to win an exclusive Montblanc Skeleton A380 Limited Edition writing instrument, inspired by the Airbus A380.

The Montblanc Skeleton A380 Limited Edition is a collector’s dream. Its dual-leveled windows and dark blue precious resin dominates the writing instrument’s 18k white gold barrel and is designed to resemble the A380. There are 28 flawless diamonds and the crown bears the Montblanc emblem and there’s an engraved 18-carat gold nib with platinum plating on the writing instrument.

Want one? Of course you do!

Board an Emirates flight and purchase the Montblanc StarWalker A380 fineliner from Emirates’ Duty Free. When you buy the luxury writing instrument, you’ll also be entered to win a luxury trip to Hamburg, Germany, where you’ll receive the Montblanc Skeleton A380 Limited Edition. Book a flight now! The promotion runs only until June 30, 2011.

Want more? Get your daily dose of pampering right here.

The Apple iPhone 4 on Verizon Wireless is here – what it means for travelers

Well, it finally happened – the largest mobile carrier in the United States is getting the Apple iPhone. Ever since the original iPhone was announced back in 2007, gadget sites have been speculating about a magical “can you hear me now” version of the phone.

But now it is here – the news isn’t really as spectacular as it could have been. A mere week after companies like Samsung, HTC and Motorola announced 4G versions of their handsets, the Verizon iPhone brings little new to the table. On the inside, it is exactly the same as the AT&T iPhone, albeit with a different radio system (for the Verizon CDMA network).

And that CDMA network is a major problem for people who plan to travel with their Verizon iPhone 4 abroad. With the AT&T (GSM) version of the iPhone, you can take it to Europe, Asia and most other countries and get access to a GSM network. CDMA users have never been that lucky – the list of CDMA countries is tiny when compared with GSM (44 CDMA networks compared to 255 GSM networks).

In other words – take your new Verizon iPhone 4 to Canada or Mexico, and it’ll work just fine. But take it to France or Australia, and you’ll only be able to use it when you find a Wi-Fi hotspot. Of course, with roaming rates as expensive as $5/min, sticking to Wi-Fi isn’t that bad a plan.

And unlike some of the newer Android devices on Verizon, their iPhone does not do dual mode CDMA/GSM. This limitation is of course not that important if your travels don’t take you outside the limited CDMA lineup, but if you are regularly in Europe, you may want to think twice about this investment. And finally, because this new iPhone uses CDMA, you will not be able to do simultaneous voice and data connections.

Balanzza TRUCO luggage – world’s first modular carry-on luggage solution

This morning, Balanzza announced their first piece of luggage. The company is better known for their products to weigh your luggage, but this experience obviously helped them design the first piece of modular luggage in the world.

The TRUCO is a three piece rolling suitcase, which can be separated into a rolling case, briefcase and compact tote. All three pieces connect to each other, and if you happen to find yourself face to face with a limited overhead storage bin, you simply disconnect the front and top bag, and place them under your seat.

The TRUCO is available today directly from Balanzza for $199. More photos of this smart piece of luggage are in the gallery below. We’ll try and bring you a full review of it as soon as we can.

%Gallery-113853%

Travel Photo Tips: What is shutter speed, and how does it affect my pictures?

Now that you’ve got a grip on ISO, it’s time to talk about shutter speed as it relates to light. What is it, and how can it be tweaked to better the photographs that you’ll take on the run? A great question, and we’re glad you asked. Simply put, shutter speed refers to the length of time that the shutter stays open while snapping a photograph. In general, the longer a shutter remains open, the more light is allowed in. And the more light that is allowed in, the brighter a picture becomes.

There’s a fine line that is walked with shutter speed. If you don’t leave the shutter open long enough, your images will turn out too dark to be useful. Having a shot that’s too dark can spoil an otherwise great vacation memory, and it’s nearly impossible to brighten an overly dark photograph using Photoshop (or a similar editing application) without adding a lot of noise and grain. On the flip side, leaving the shutter open too long can result in a couple of negative outcomes.

We’ll discuss these and walk you through an example after the break, so grab your advanced point-and-shoot, interchangeable lens camera or DSLR and read on get a better feel of how changing the shutter speed can change the outcome of your snapshots.As usual, we’ll try not to dive too deep into aspects that you don’t really need to understand. But there are a few basic things you’ll need to know about shutter speed in order to make quick adjustments as you’re shooting different scenes — assuming you’re not shooting on automatic mode, of course. Your travels won’t always put you in an optimal place for taking shots, leaving you with limited options to control the amount of light that floods into each shot. Adjusting shutter speed is one of the quicker ways to do just that.

Shutter speed is referred to in terms of seconds, or fractions thereof. For example, you may see a “400” on the data monitor of your camera. This means that you’re set to shoot at 1/400 of a second. This is just a small fraction of a second, which means that the shutter will open and close extremely quickly. If you see an “8,” that means you’re set to shoot at 1/8 of a second. In the image below, the “30” signifies that this camera is currently set to shoot at 1/30 of a second.

Here are a few general rules to keep in mind while adjusting shutter speed. These won’t apply in every single scenario, but these are good guidelines to keep ingrained in your mind when you’re trying to figure out shutter speed extremes on the fly.

  • If you’re shooting a still subject handheld (without a tripod), it’s generally tough to hold the camera still enough to eliminate blur from a shot at a shutter speed slower than around 1/80 of a second. Sometimes you can get as slow as 1/25 of a second while holding it still, but that’s more the exception than the rule.
  • If your subject is moving at all, and you’re forced to hand-hold the camera, I’d recommend shooting at 1/160 of a second or faster to ensure little-to-no blur is introduced. If you find that 1/160 of a second still isn’t quick enough, a bump to 1/200 or 1/250 of a second should suffice.

Of course, both of these points are assuming you do not want blur in your shots. There are certain scenarios where some amount of blur is desired, such as capturing the beauty in flowing water in a babbling brook. But in those cases, you can start at around 1/100 of a second and move slower. Here’s an important point, though: when you desire a certain amount of blur in a shot, you’ll almost certainly need a tripod. Why? Because you only want a certain portion of the photograph to be blurred (the water, in the previous example), but you wouldn’t want the rocks and surrounding plants to also be blurred.

Let’s look at one simple example to give you a better grasp on how adjusting shutter speed makes a difference in your photographs. You’ll need a camera with a manual mode; most point-and-shoot cameras do not allow users to adjust shutter speed, but a few of the more advanced models will. Essentially all interchangeable lens, Micro Four Thirds and DSLR cameras will, however.

Similar to our ISO example, we’ll have you head to a room inside your home. Find a subject — a phone, a coffee mug, any kind of still object — and place it on a table or on a bed. We’ll be shooting this with various shutter speeds. There are a lot of other variables to consider, of course, but this simple example will show you how shutter speed itself directly impacts the outcome. Let’s start with a shutter speed of 1/500 of a second, and disable your flash for the duration of the example. Fix your ISO on 1600 (since you’re indoors in a low-light scenario) and your f/stop number as low as it will go (f/2.8 or f/3.5 if possible). Focus on the subject and shoot. What’s the outcome? Probably a dark shot, but if you can make out any of the subject, you’ll notice that it’s impeccably sharp.

Now, adjust that to 1/250 and shoot again. What’s the outcome? Probably a slightly brighter photograph, and one that’s still sharp. You should get the impression that you’re moving in the right direction. Now, adjust to 1/160 of a second and shoot again. Your image should be even brighter, and if you have a steady hand, still sharp and blur-free. Now, the fun part. Adjust to 1/50 of a second and re-shoot. You probably noticed just how slow the click was. But how about the outcome? It’s probably a very bright image, maybe even too bright, but it will almost definitely have some level of blur to it. Let’s try one last stop: lower the shutter speed to 1/5 of a second and re-shoot. It’s practically impossible to hand-hold this shot and not introduce blur. You’ll probably be happy with how bright the image is, but the amount of blur will likely make the image less than ideal. Below is a brief gallery guide of how changing the shutter speed alone can allow more light in, but also make it easier for handheld shake to introduce blur.

%Gallery-112431%
In a nutshell, you’ve just learned how shutter speed alone can adjust your shot. If you need to let more light in, slowing the shutter solves your problem, to an extent. If you slow it too much, you’ll lose the ability to compose a blur-free image. If you speed it up too much, the image will become too dark. Like we said at the start, it’s a fine line you’ll have to walk. If you try a similar experiment outside, in broad daylight, you’ll notice that you need a much, much faster shutter speed to compose a usable image. If you keep that 1/8 of a second while shooting outdoors, you’ll probably get the polar opposite of a completely dark photograph: a completely white photograph. The solution? Speed that shutter up dramatically –1/500 of a second or faster — and see how it changes things for the better.

Keep in mind that this is just a basic explanation of shutter speed to get you started. In future articles, we will cover tips on how to use changes in shutter speed for creative effects in scenarios related to travel. For example, using the shutter speed to help you best capture a flowing waterfall, compose an exploding firework shot, controlling blur, etc. Hopefully with the pointers listed here and in our previous article on ISO, you’ll be two steps closer to understanding your camera’s ‘Manual’ mode.

Let’s recap:

  • Adjusting shutter speed is one of the quickest ways to add more light or restrict light to a photograph
  • Indoors, or in low-light situations, you’ll need to slow the shutter speed dramatically if you don’t have a flash to use, or would rather not use the flash
  • In general, it’s difficult to not introduce blur into a shot while shooting handheld with shutter speeds 1/80 of a second or slower (or 1/160 of a second if your subject is moving)
  • Outdoors, you’ll need very quick shutter speeds (1/500 of a second or faster) in order to avoid having a completely white image, or an image that’s overly bright
  • Having a tripod or a lens with vibration resistance can enable you to have a slower-than-average shutter speed, yet still avoid blur

Stay tuned for more tips on understanding metering, f/stop, white balance and more! Our basic guide to understanding ISO can be seen here.

Idapt i1 Eco charger charges 2 devices, keeps things green

Idapt chargers have been around for some time now – and their desktop multi-device-chargers are indeed pretty slick.

The company is taking advantage of Consumer Electronics Show to announce a charger that expands off that lineup with a totally green option.

The Idapt i1 Eco turns off when your device is charged, and won’t wake up till you press its re-start button. To top off the green part of the design, the i1 designed to look good without the use of any chemical painting products.

The charger features two ports – one that used iDapts own charger tips, and one USB port. This means you can use plugs from any other Idapt charger products, as well as any current USB cords you have lying around.

The new i1 will be available in Spring – but no price has been announced just yet.